ALPHA 3-way Lever Switch

[bigpeekay]

Hi folks,

I am putting together a nice superstrat with an explorer neck but I am struggling with figuring out the wiring.

The guitar body is loaded with a single coil in the neck position and a humbucker in the bridge, 1 volume, 1 tone and the dreaded ALPHA 3-way!

It has all of the connectors/lugs in a row on the bottom of the switch casing.

So, before I go get a new multimeter, I just wondered if anyone happened to have a handy wiring diagram just lying around!!!!!!!!!!!!!!!!!!!!!!!!

Cheers,
BPK

[JACKSONFREAK]

Try this. Typically those style switches are wired like this. Terminals left to right 43211234.
4 not used 3 is neck pup and soldered to 2 1 soldered to 1 then to volume pot left lug. 2 soldered to 3 bridge pup on 3 and 4 not used.

[JACKSONFREAK]

I found this on ibanez website. just swap out th pup styles for what you have. Assuming the pups ur using are 2 conductor.

http://www.ibanez.com/support/wiringdiagrams

Gil

[bigpeekay]

Alpha 3 way

Try this. Typically those style switches are wired like this. Terminals left to right 43211234.
4 not used 3 is neck pup and soldered to 2 1 soldered to 1 then to volume pot left lug. 2 soldered to 3 bridge pup on 3 and 4 not used.

thanks for the help when the guitar comes back from neck works I'll post a picture (somehow) and let you know how the wiring went!

bpk