Charvel Wildcard #8 Wiring?

[Big Al]

Does anyone have a schematic or picture of the wiring for a Charvel wildcard #8? I removed the EMG 85 for a passive pickup and bypassed the kill switch. I would like to try an EMG 85 or 81 and would like to wire the kill switch back in.

Thanks!

[Big Al]

I know the basic wiring of the single EMG, just not sure about the kill switch.

[Newc]

One side to ground, one to hot? Haven't seen this model in person, but it seems to me if it's a push-push switch, one side should be on and the other off.

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=kill_switch

[Big Al]

Thanks for the link. I checked the switch and it has three lugs. Does the switch interupt the ground? If so, I would think that one lug is signal connected, one signal unconnected and one to common ground.

I have got to spend some time thinking about wiring in general.

[Newc]

Does that switch light up? 3rd lug might be for the led.

[Hellbat]

More likely one lug is connected when pushed and the other is connected when not pushed. That way the switch could function as push to connect or push to interrupt.

[Big Al]

Does that switch light up? 3rd lug might be for the led.

No LED or light.