OK, I'm in over my head. I bought an '89 heather pearl Charvel model 4 for my buddy as a surprise. Unfortunately it had all the original electronics and pickups swapped out. So I bought all the original stuff to put it back to original condition. I also gave it a rainbow crackle finish. My problem is this, I am stuck on the wiring. I have 80% of it done based on various pics I have found online. You can't see where some of the wiring goes in those pics. I need to know where the green, black, red, white and ground goes for the humbucker and where the ground and hot wire go for the bridge and middle pups. Also need to know where the ground bundle that starts under each pup gets finished at. Clear pics would be very helpful. Thanks
Announcement
Collapse
No announcement yet.
Charvel model 4 wiring
Collapse
X
-
Thanks. Battery is brand new, wiring is identical to second guitar I bought to use as an example. Working on the multi-meter now. If I bypass the jack and just put a hot wire to the mini toggle I get sound at the first pot closet to the jack. But not at all of them. Got a new jack coming. Going to start swapping pots to see if one is bad.
Comment
Comment