Wiring: 2 hum, 2 vol, 1 tone, no PU switch .... ??

[Newc]

Re: Wiring: 2 hum, 2 vol, 1 tone, no PU switch ...

Yeah me too [img]/images/graemlins/laugh.gif[/img]
I really need to set up a guitar that has all possible wiring combos in it with jumpers that I can just swap them around and test the connections. [img]/images/graemlins/grin.gif[/img]

So now you've got the pickups running to the center tab of each pot and the outer tabs going to the tone, right?

Newc

[White]

Re: Wiring: 2 hum, 2 vol, 1 tone, no PU switch ...

[img]/images/graemlins/smile.gif[/img]

That solution was so stupidly simple. . . *smacks forehead*

[delt]

Re: Wiring: 2 hum, 2 vol, 1 tone, no PU switch ...

> I really need to set up a guitar that has all possible wiring combos in it with
> jumpers that I can just swap them around and test the connections. [img]/images/graemlins/grin.gif[/img]

The way this guitar is setup is, i have a piece of computer flat-cable soldered to each component (3 wires for pots, 6 for toggle switch/push pull sections etc) and when i'm testing wirings i can just twist the wires together and put tape on them, that way i don't waste some pickup lead, or excessively burn up the pots. (: (:

> So now you've got the pickups running to the center tab of each pot and
> the outer tabs going to the tone, right?

yep. seems to work fine this way.

> That solution was so stupidly simple. . . *smacks forehead*

hehehhehehehe my thoughts exactly... !!
btw do i know you from ultimatemetal.com's Children of Bodom message board?

[White]

Re: Wiring: 2 hum, 2 vol, 1 tone, no PU switch ...

Who me? never been on that forum, so no. sorry.