If anyone has more than a few bottom adjusting truss rods

john.w.lawson

Platinum Member

Join Date: Aug 2008

Posts: 3338
- Share
- Tweet
#1

If anyone has more than a few bottom adjusting truss rods

06-05-2022, 09:21 PM

Stewmac makes and sell a wheel end , if you wanted to remove some wood. Not for beginners!

Heres a video that will give you some ideal. I'm gonna do it on the washburn and a couple others!

What Leo Fender Got Wrong... And How To Fix It!

https://www.youtube.com/watch?v=ssZf5vZ3-qc

A few Years ago I made a video about bolt on necks and how Leo Fender over estimated people's desire to replace a guitar neck. Of course there were a lot of ...

I know the old saying that the value of an opinion is generally inversely proportional to the strength with which it is held.
Tags: None
john.w.lawson

Platinum Member

Join Date: Aug 2008

Posts: 3338
- Share
- Tweet
#2

06-05-2022, 09:42 PM

Link to the spoke wheel it's cheap, shipping cost more than it if you only order one. I order three and it was the same.

Spoke Wheel Truss Rod Nut - StewMac

https://www.stewmac.com/parts-and-hardware/nuts-and-washers/spoke-wheel-truss-rod-nut/

A modern approach to 'heel-adjust' necks. The spoke wheel allows you to adjust the neck while it's still bolted on.

I know the old saying that the value of an opinion is generally inversely proportional to the strength with which it is held.
Comment

Announcement