Announcement

Collapse
No announcement yet.

Rhoads and KV cableguide, i need some help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rhoads and KV cableguide, i need some help

    hi
    this is to all of you that own, or have worked on a guitar like that [img]/images/graemlins/help.gif[/img]
    we know that most us models got a stratstyle jackplate in the upper wing, this is a really great feature [img]/images/graemlins/headbang.gif[/img]
    the thing is
    i want to upgrade my ps3t with that feature and must know where the cable goes [img]/images/graemlins/scratchhead.gif[/img]
    1. are the cableholes drilled directly upwards behind the tremcavity?
    2. are there 2 holes in an angle that guide the cable through the trem cavity?
    or 3. does the drillhole go above the tremcavity directly to the pickupcavity, so that the cable is guided from the controlcav backwards through pickupcavity to the jackplate
    it would be very kind of you if you could post an easy drawing of the cableguide in your axe, or describe it as close as you can
    thanks a lot
    andy [img]/images/graemlins/help.gif[/img]

  • #2
    Re: Rhoads and KV cableguide, i need some help

    On this Rhoads Pro I have just laying around, the cable route does NOT go through the trem cavity at all. Neither towards the pup cavity (Why would it? Pup wiring, or signal path, goes: pup --> vol/tone pots --> jack). The route goes from control cavity up towards the upper wing, with no stops along the way [img]/images/graemlins/grin.gif[/img] Let us know how you do, as I'd like to do this project to my own KVX10 if it's not too tough. Although my routing will take a different, custom path.
    "Quiet, numbskulls, I'm broadcasting!" -Moe Howard, "Micro-Phonies" (1945)

    Comment


    • #3
      Re: Rhoads and KV cableguide, i need some help

      that means it goes direcly from controlcav to the jackplate behind the tremcav?
      or does ot go through the pickupcavity and above the tremcav?

      Comment


      • #4
        Re: Rhoads and KV cableguide, i need some help

        Model1, I edited my reply, so check it again.

        Look, ma, no holes! [img]/images/graemlins/grin.gif[/img]

        "Quiet, numbskulls, I'm broadcasting!" -Moe Howard, "Micro-Phonies" (1945)

        Comment


        • #5
          Re: Rhoads and KV cableguide, i need some help

          [ QUOTE ]
          Neither towards the pup cavity...The route goes from control cavity up towards the upper wing, with no stops along the way

          [/ QUOTE ]

          OOPS! Upon further review, I find my reply up there is partially wrong! Doh! The cable IS in fact routed fron the control cavity through the side of the bridge pup cavity, then goes to the other "wall" of the cavity, then is routed over the top of the trem cav to the jack. Look at the pic I posted, you can clearly see the cable going right through the bridge pup cavity. Sheesh that's what I get for posting at 2 AM.
          "Quiet, numbskulls, I'm broadcasting!" -Moe Howard, "Micro-Phonies" (1945)

          Comment


          • #6
            Re: Rhoads and KV cableguide, i need some help

            very cool racer
            that´s all i wanted to know:
            pickupcav to jackplate, yeah
            btw nice rhoads pro
            i wish i had one like this
            yellow black bevels is my current favourite on rhoads´
            thanks again
            andy

            Comment


            • #7
              Re: Rhoads and KV cableguide, i need some help

              lookie what happened yesterday late evening:
              my bed became a battlefield
              i got drills and carvers and started an experiment
              first i did the hole for the jackplate with a big conus-drill
              http://tinypic.com/o1l4y
              <img src="http://tinypic.com/o1l4y">
              why do the pics not work this way [img]/images/graemlins/scratchhead.gif[/img]
              http://tinypic.com/o1l7b
              <img src="http://tinypic.com/o1l7b">http://tinypic.com/o1mww
              <img src="http://tinypic.com/o1mww">
              then i did the long hole from the new jackplatehole to the picupcav [img]/images/graemlins/crazy.gif[/img]
              never do this at home
              if though: things to attend
              thake a long 1/4inch drill, i mean really long
              mine is 10 inches and i thought it was long, but it wasn´t long enough
              take at least one with 11 inches better 12
              drink no alcs three days before you do that because
              you must aim very exactly, 1 degree in angle make about an inch over that length
              so i drilled and drilled, and thought the angle would be quite good
              then the drill was nearly at its end and there was a strange scratching noise
              i wondered what this could be, thought it was the pickup-bezel screw and removed it, nothing to see
              drilled further strange scratching again
              so i pulled out the upper trempost and look what i found
              http://tinypic.com/o1mhi
              <img src="http://tinypic.com/o1mhi">
              coul´ve kicked me for that
              ok then the drill was already at it´s end so i had to come from the pickupcav other direction
              no further problems then
              wired it, soldered it, reassembled it
              and now ive got a ps3t with a stratstyle-jackplate in the upper wing [img]/images/graemlins/grin.gif[/img]
              http://tinypic.com/o1mhc
              <img src="http://tinypic.com/o1mhc">
              yes i´m a bit proud of myself, cause things could´ve gone worse
              greetz
              andy

              Comment

              Working...
              X