String keeps sliding off the saddle

[MetalGrasshopper]

I have a TOM bridge and the low E string keeps sliding off the saddle. I'm thinking it might be because I'm using .52 gauge E string and the notch on the saddle is too small. Also the bridge is slightly angled to supposedly make its intonation better (ESP came up with it...go figure)

Anyway..any ideas?

[etaeniura]

Re: String keeps sliding off the saddle

if you feel comfortable with a file you can widen it a bit, or have a tech do it. YOu can also try lowering the stop bar a little bit to put a little more downward pressure on the saddle-it might be just enough to keep it in place.

[MetalGrasshopper]

Re: String keeps sliding off the saddle

I guess I should try the file, I can't do anything with the stop bar since its a string thru.

[etaeniura]

Re: String keeps sliding off the saddle

i know you can use the actual string to widen plastic nut slots by running a piece of it through there a few times, but I'm not sure how well that would work on a steel saddle.