Tweet
Please forgive my lack of knowledge on this subject, but could someone explain to me which strat type bodies could be used with Warmoth necks? I think that not all strat/dinky type bodies could not be used with Warmoth necks because of intonation problems, but I'm not sure about which bodies confront these problems. Example of bodies would be ESP M-II bodies, Ibanez RG bodies, etc.
-
-
Re: Warmoth neck and strat type bodies
in a nutshell, you'll need a 25.5 scale body that needs a 22 fret neck. not sure about esp, etc, but that's your general rule. you'll also need a neck pocket wide enough to accept a 2 3/16" neck heel, which should not be a problem at all.
sully -
Re: Warmoth neck and strat type bodies
Don't run out and buy anything based on what I say [img]/images/graemlins/tongue.gif[/img] but I think a Warmoth should fit on a Jem / RG with a block-heel joint. I just measured the neck pocket on my Jem and it's 2-3/16". And eyeballing the neck against an old Warmoth, the joint seems to be in the same place on the neck.
Don't know about ESPs.Comment
Comment