Finding the right nut

[1trussell]

For a Charvel Model series, I know the nut width is 1 11/16ths". But what height and depth should it be to fit properly? Anyone know of any aftermarket nuts that have the right measurements right off the bat?

[plon]

Re: Finding the right nut

This nut HERE will work. I had to adjust it for string height. All I did was lay a piece of 150 grit sandpaper on a flat surface and with even pressure, I sanded it down till it was the proper height. Worked great.

[1trussell]

Re: Finding the right nut

Great, thanks.