Wiring EMGs to one volume with a 3 way toggle?

[DumpyWumpy]

Anyone have a diagram for wiring a pair of EMG hums in a one volume, no tone, 3 way toggle configuration? All the diagrams on the EMG site contain a tone knob and alas, my Kelly contains no such knob!

[rjohnstone]

Re: Wiring EMGs to one volume with a 3 way toggle?

Just omit said tone knob from wiring diagram.
The lead(s) that would go from vol pot to tone pot goes straight to the jack instead. Toss the tone cap in the trash.

[Sunbane]

Re: Wiring EMGs to one volume with a 3 way toggle?

No problems at all: Just disconnect the tone knob and the capactior from the circuit, and that's it.

With Two pickups and one pot, you'd want to run the hot lead of both pickups to the toggle switch first. Then take the output from the switch and wire it to the volume pot, where the hot lead from the pickup usually goes. And finally, the output lead from the pot (that normally goes to the switch), go to the output jack.

Edit: Rick beat me to it. [img]/images/graemlins/smile.gif[/img]

[Dreamland_Rebel]

Re: Wiring EMGs to one volume with a 3 way toggle?

if that doesn't make sense or you really need a diagram, call or email EMG directly. they are very friendly and will be happy to email you any diagram you need.

[RobRR]

Re: Wiring EMGs to one volume with a 3 way toggle?

Here you go, this should work!

[DumpyWumpy]

Re: Wiring EMGs to one volume with a 3 way toggle?

Awesome!!! Thanks a ton guys!!!