If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
When I opened the electronic cavity, I noticed two small pots with a Phillips style head(like on the JE-1000) on the sustainer board.
What can I adjust with these pots?
Ahh... these are used to adjust sensativity and gain for the sustainer. Be careful with the gain... you'll know which one it is the minute you tweak it.
If you set it too high the unit will get a whistle effect and you battery life will drop.
Comment