Fender 3-way with 2 humbuckers

[lhrocker]

Is it possible to wire 2 humbuckers to be neck/both/bridge on a standard Fender 3/5 way switch? On a 5 way, 2 and 4 would be the same as 1 and 5 respectively.

Thanx,
Pete

[sully]

Re: Fender 3-way with 2 humbuckers

yep! here's how you wire the 5 way switch.

http://www.sullyville.net/crap/switch.pdf

[lhrocker]

Re: Fender 3-way with 2 humbuckers

Thanx Sully!!!

[Zerberus]

Re: Fender 3-way with 2 humbuckers

Duncan also has a few different ways on their site.....
http://www.seymourduncan.com/support/schematics.shtml

[sully]

Re: Fender 3-way with 2 humbuckers

and if you have issues, feel free to email the guys at duncan; that's where that diagram came from.

[lhrocker]

Re: Fender 3-way with 2 humbuckers

Sully - it worked out good and only took a couple of minutes to do. Thanx again!!!

[SGplayer]

Re: Fender 3-way with 2 humbuckers

Here's a fender link to a HH 3-way switch, neck-both-bridge.
I switched out my strat from HSS to HH, using the Fender bridge in the neck & Dimarzio X2N in bridge, I used the diagram. The sound is a great improvement on a Fender 3-way switch.
http://www.fender.com/support/diagra...134800APg2.pdf