Tweet
I got a Strat body on trade and I'm wanting to build it up as a project mutt. It's drilled for a 2 point trem. Most of the 2 point Strat trems I'm finding online are spaced approximately 51-52mm from center pivot to center pivot. This body is measuring about 2-7/16" or about 61-62mm from pivot hole to pivot hole. I can't seem to find any bridges with this measurement. Any ideas? I was told it was an import Strat body, it's routed for h/s/h, if that helps at all.
-
-
Re: help finding a 2 point strat bridge
Sounds like it might be setup for a Wilkinson... they have some different spacing though.
VS-50 has a 54mm spacing
T-01 has a 56mm spacing
There's another Wilkinson that has a 57mm spacing, but i can't remember the model number.-Rick -
Re: help finding a 2 point strat bridge
See, when I measure the holes, it's right at 61-62mm. I wouldn't think that a 6mm difference in the spacing would be compatible.Comment
-
Re: help finding a 2 point strat bridge
plug and redrill?Comment
-
Re: help finding a 2 point strat bridge
+1 Just plug it and start over.
I did some searching and I can't find any two point with a spacing like that.
Maybe the driller tried to eyeball it [img]/images/graemlins/scratchhead.gif[/img]-RickComment
-
Re: help finding a 2 point strat bridge
I'm thinking I'm going to have to fill and drill. I posted a topic over at the Fender forum to see if anyone knows anything about that spacing.Comment
Comment