Tweet
Heya Guys,
I need some help with pickup wiring. I've never ever done this before, and I know not much about it, but I'm pretty sure I'm able to solder well enough. I've got an H/S/H charvel, with a 3 way lever, and two knobs. I want the three way switch to work as a two way (position 2 being empty, as I don't use the single, so, you can pretty much disregard that). I want the first knob (top one) to control the neck volume, and the bottom one to control the bridge volume. The second knob is also a pull-up knob, which I want to coil split the buckers. The two pickups are a DiMarzio Al Dimeola in the neck, and an X2N in the bridge, they both have a black, white, green, and red wire, and a bit of metal coming out as well.
If anyone can tell me, or draw a diagram on how to wire this, I would be most thankful,
Thanks,
Jonny
I need some help with pickup wiring. I've never ever done this before, and I know not much about it, but I'm pretty sure I'm able to solder well enough. I've got an H/S/H charvel, with a 3 way lever, and two knobs. I want the three way switch to work as a two way (position 2 being empty, as I don't use the single, so, you can pretty much disregard that). I want the first knob (top one) to control the neck volume, and the bottom one to control the bridge volume. The second knob is also a pull-up knob, which I want to coil split the buckers. The two pickups are a DiMarzio Al Dimeola in the neck, and an X2N in the bridge, they both have a black, white, green, and red wire, and a bit of metal coming out as well.
If anyone can tell me, or draw a diagram on how to wire this, I would be most thankful,
Thanks,
Jonny
Comment