What dimarzio is this?

[jacksonaxes]

On the back it just sez dimarzio pickups Made in the USA,white wire, black wire, and ground, reads a little over 12 ohms with my cheap meter.

sorry about the crappy pics

[slash-ed]

PAF Pro?

[Racerx2k]

Would help if you could actually SEE the pickup in the shot, instead of a big blur. I feel like I have beer-goggles on.

[rjohnstone]

Back the camera up and focus.
Use the zoom on the camera... most PHD (push here dummy) cameras can't focus on anything closer than 1 meter.

[jgcable]

Its hard to tell in the pic but its either a PAF pro or a Super Distortion. None of the older ones were marked.

[j2379]

didnt the PAF pro have one set of fixed poles & ones set like that. ide say super distortion or super 2/3

[RacerX]

I feel like I have beer-goggles on.

[UFORocks]

yeah, can you get a better pic? Its most likely going to be a Super D or Paf as they are the most common ones. Being 12 ohms im guessing Paf... ?

[toejam]

All of the sudden, my picture-taking skills seem pretty kick ass! Thanks for making me look good.

[jacksonaxes]

Your welcome, actually it's my crappy 2.0 camera, and the flash wont work, i'll get some better pics.

[krimson]

Are those all the poles Hex screws? Looks like a Super Distortion to me. You can email some clear pics to Dimarzio and they will help identify it. I have an old Hamer branded Dimarzio made PAF that they helped me to identify with a picture.

[Rupe]

Looks like a SD...most Paf Pro's have black poles.

[charvelguy]

Super 2 and Super distortion were basically the same pickup, minor variances. It looks like an old super distortion but the resistance rating should be closer to 13.3. Braided line with a black and white w/ grd means it was likely built in the 70's. Red wire is hot I believe.