If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Get a very well padded gig bag load some bubble wrap around the neck and headstock.Place in shipping box tape well insert box inside a larger shipping box use peanuts(faom)and bubble wrap to suspend inner box inside outer box.Tape well and ship.
Remove the neck... ship body and neck seperately. I like to use those long, triangle shaped shipping boxes for sending necks. They're pretty hard to crush. Just wrap it in a shitload of bubble wrap and make sure it doesn't slide around in the tube. Even a 24 fret neck will still have about 3-4 inches of clearence on both ends of the tube. Fill that with bubble wrap as well. No movement in the tube is key.
Wrap the body in a few layers of bubble wrap and then put it in a box with 4 inches of clearance on all sides of the body and fill it with packing peanuts. You sould be good to go.
Never ship a guitar in just a gig bag unless you plan on double boxing it.
Even then, insure the hell out of it and let the UPS Store, or what ever shipper you're using, package it. When it arrives crushed, they won't be able to use the standard claim denial that it was not properly packed.
Even then, insure the hell out of it and let the UPS Store, or what ever shipper you're using, package it. When it arrives crushed, they won't be able to use the standard claim denial that it was not properly packed.
SEALED AIR® brand Instapak® Quick® RT are expanding foam bags for shipping that give your products cost-effective damage protection—no equipment needed.
What do you guys think about this stuff? I have used it for shipping fragile electronic equipment to Europe, and it has never let me down.
Comment