JT6 sustain block size?

[Dreamland_Rebel]

is the sustain block on the JT6 42mm or 37mm?
this is for a model 3.

thanks,
John E.

[dg]

42mm

[Thoraby]

The spacing for the screwholes that attach the JT-6 block to the baseplate is different from OFR, so keep that in mind if you're getting a new block...

[Dreamland_Rebel]

i'm getting an OFR, and want to make sure i get the right block size. warmoth's site shows the OFR as having a 37mm block standard. but i want to make sure everything lines up when i drop the OFR in my model 3.

[toejam]

i'm getting an OFR, and want to make sure i get the right block size. warmoth's site shows the OFR as having a 37mm block standard. but i want to make sure everything lines up when i drop the OFR in my model 3.

There's three different block sizes... 32mm, 37mm and 42mm. Make sure you get the 42mm.
37 might work, but it'll be more of a flush mount and not higher off the body like a 42.

[Thoraby]

i'm getting an OFR, and want to make sure i get the right block size. warmoth's site shows the OFR as having a 37mm block standard. but i want to make sure everything lines up when i drop the OFR in my model 3.

Yeah man Toejam's right get a 42 mm, otherwise if you set it to float you'll have the springs slipping out of the block which equals to a tuning nightmare