Wiring Help

[Shawn Lutz]

I'm wiring two Seymour Duncan humbuckers in a Charvel Strat that as 1 Volume and a 3 Way Toggle. I tried this diagram http://www.seymourduncan.com/website...1vol_3way.html

The problem is the neck position sounds like it is a single coil (coil tapped). I swapped the green and blacks and I have the same thing. I did just for the hell of unsloder the red and whites and connected the Red to the 3way center...it makes it sound like a humbucker but it doesn't get the hum canceling [img]images/icons/mad.gif[/img]

Any help would be greatly appreciated

[Somnuszoth]

Re: Wiring Help

my warlock had a super distortion in it that was wired backwards from the factory. maybe yours is the same way......im not sure how to check but there is a way to check it with a meter...