J90 Help

[CharvelRocker]

Okay, two questions: Number one, I have a J90 pickup. Now this isn't the best looking pickup I've seen in my life, so does anyone make J90 covers? The second is when I wire this up, what wires go where? I know bare = ground but thats it. Red and white are soldered together.

[Nazgul]

There are two covers for sale on eBay:

http://cgi.ebay.com/Jackson-Pickup-Covers-80s-Pair-J-60-J-90-NO-RESERVE_W0QQitemZ330102286172QQcategoryZ22670

And if I were you, I would edit out your sig. You know what I mean .

[CharvelRocker]

Thanks. Anyone make new ones though that would fit?

[Nazgul]

I doubt it. Go for the ones that are on eBay. If you don't need two, you could always sell one here. They are pretty rare to find and there's always someone looking for them .

EDIT: For wiring, check the Jackson electronics manual:

http://www.audiozone.dk/CatalogScans/JackElec1987/index.htm

or

http://www.audiozone.dk/CatalogScans/JackElec1988/index.htm

[CharvelRocker]

Thanks!

[JACKSONFREAK]

The wiring is the same as a duncan. Red nd white are soldered together and tapped. Green and shiled are ground. Black is hot out. However. if the J90 is being combined with a duncan pup switch the black and green wires. They are on opposite ends compared to the duncans and will be out of phase.
Gil