Which Switch?

[T@rgetDrone]

I plan on hopefully beginning my first experience installing active pups tomorrow. Should I use the stock circuit board 3 way selector switch that came w/the guitar or should I nix it for an All Parts or similar? Common sense tells me to nix the stock switch but I really have no knowledge to base my instinct on except I generally despise cb switches to begin with.

Any suggestions for the best possible 3 way switch? I don't mind spending extra for the good stuff. Any wiring diagrams help would be appreciated too. That is just for the switch itself, stock Jackson 3 way or otherwise. I could dig out the multi meter and chase it all down. I've wired enough switches before. But my (recently) half crippled ass is trying to grab a few shortcuts for the "how to's" while still taking my time and spending my limited energy on the actual work.

[MountainDog]

As long as the stock switch is working fine, you can use it. You don't need a special switch for actives.

[Vlover]

As long as the stock switch is working fine, you can use it. You don't need a special switch for actives.

bump




You just need to change the Pots and Jack