EMG's w/ Blade switch wiring help please?

[Dreamland_Rebel]

does anyone have the schematic for 2 emg's with a 3 way blade switch?

1v, 1t, with a 3 way blade.

i know which tabs the pickup hot's go, but i need to know which tabs the wires from the switch to the pots go.

thanks so much,
~JW

[skidd]

Re: EMG\'s w/ Blade switch wiring help please?

http://www.emginc.com/support.asp

[Sunbane]

Re: EMG\'s w/ Blade switch wiring help please?

I think the EMG diagrams only show toggle switches. But I'm thinking you could just wire everything up, except the wire from switch to volume - then hook the guitar up to the amp, put some vibration on the strings and test the tabs with the loose wire. I've never done it that way myself, but it should work.

'bane

[Jim Shine]

Re: EMG\'s w/ Blade switch wiring help please?

Use a Telecaster diagram.
Seymour Duncan tele diagram.

[Dreamland_Rebel]

Re: EMG\'s w/ Blade switch wiring help please?

i think i got it.

i just guessed using the toggle diagram thining, ok looks like ground goes to pot casing, and hot goes here. i already knew which one was the hot from the previous pups that i pulled out. and i found the ground tab no problem. i still need to test it though, i didn't have my rig set up to test last night. so i'll test tonight.

thanks,
~JW