Announcement

Collapse
No announcement yet.

Neck Profile Question?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Neck Profile Question?

    Which is closer to the OLD san dimas profile in an 1-3/4 nut width,

    Modern C or D Shape?


    [email protected]

  • #2
    I have an 80 pre-pro with a huge D shape 1 3/4 nut. Altough the more common shape is a thin/wide C shape. But anything was possible back then, I also had a 1981 (HB) neck 1 5/8 nut and a somewhat fendery back shape to the neck; These were refered to as: G1- 1 3/4 nut, wide, flat
    G2- 1 5/8 nut, boat or "V"
    G3- 1 5/8 nut, early 60's shape. This ia taken from a 6/1/81 retail price list. Price of a maple strat neck was $200. Rosewood $210. Ebony $250
    Oil finish option was $40.00 and Laquer $120
    They made these necks: Strat
    Tele
    Explorer *
    Flying V *
    * Available in G1 only
    Came with jumbo frets,5% upcharge for (special) size frets.
    Hope this Helps.

    Comment


    • #3
      THanks !

      Thats helps a bunch!

      Comment

      Working...
      X