pup tech advice sought

[llocust]

I've decided to upgrade the pups in my Soloist AT.
I'm going with a neck SD SH-1 1959 and an SD SH-13 Dimebucker in the bridge.

What do I need to know to install these?

[dg]

Is it 1 volume, 1 tone, & 3-way switch? Here's the Duncan diagram for that layout:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_1t_3w

Your SH-1 probably isn't 4 conductor, so there won't be a red & white wire to solder together for that one. If you need soldering tips, there's a tutorial here:

http://www.jcfonline.com/forums/showpost.php?p=521165&postcount=16

[JACKSONFREAK]

You can get the 59 in both 2 conducter and 4 conducter wiring. Just follow the wireing schematic that comes with the pups and you shouldn't have any issues.
Gil

[llocust]

Is it 1 volume, 1 tone, & 3-way switch? Here's the Duncan diagram for that layout:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_1t_3w

It is vol/tone/3-way switch. Thanks for the diagram.