If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have done a seach here but I could not find a difinitve answer. I think it is 6100 . I am ordering a Musikraft Charvel neck and would like to know for sure.
Anybody?
6100 is the Dunlop equivalent of Charvel/Jackson's "jumbo" frets. it is not the exact same fret wire but as close as you can get from most aftermarket neck manufacturers.
6100 is the Dunlop equivalent of Charvel/Jackson's "jumbo" frets. it is not the exact same fret wire but as close as you can get from most aftermarket neck manufacturers.
+1 and Musikraft will do a good job for you.
Tone is like Art: Your opinion is valid. Listen, learn, have fun, draw your own conclusions.
Oops...I went with 6150's because they don't feel quite like train tracks to me. I posted my Musikraft specs just to show what options I had selected when I bought mine. That's why I posted the Model 2 specs first. Damn my confusing ass.
Not sure if the Model Series wire size is exactly the same as what the USA guitars use(d), but mine all seem pretty close. Going by that, the closest match is 6110. Model Series wire was .114" x .051", and 6110 is .115" x .050", just a bit wider & not quite as tall as 6100 (.110" x .055"). We're just talking about a few thousandths here, so 6100 is gonna be damn close.
I have a guitar with 6000s on it (awesome frets) - and it's definitely not the same size as Jackson's jumbo frets, there's a very noticeable difference.
Comment