Who Sells the JT6 Trem String Screws

[JDA]

Hi,
Does anyone know who sells the JT6 Trem string screws? It's the 6 long screws that has an allen wrench head that holds the strings into the bridge.

Thanks! JD...

[Jack Napalm]

http://www.fretsonthenet.com/

[Shibs]

Here ya go....

http://www.guitarnucleus.com/gnstore/tremolo.html

[CharvelRocker]

Here ya go....

http://www.guitarnucleus.com/gnstore/tremolo.html

I see an issue. For the Fine Tuner to work correctly on the JT6, the screw needs to be fully threaded does it not?

EDIT: Likewise, those won't fit; the JT6's size is a 2.5mm , while those are 3mm

[JDA]

Thanks guys for your help. It is fully threaded and looks like the one they have pictured here, but it's sold out.

http://www.fretsonthenet.com/8stringlockscrew.JPG

Thanks! JD...

[straycat]

If you have stripped the allen heads just cut a slot in the allen head and use a flat blade screwdriver.

[JDA]

If you have stripped the allen heads just cut a slot in the allen head and use a flat blade screwdriver.

The heads on the screws were already in poor shape when I got the guitar. If I don't have any luck finding new screws, I'll take your advice and cut slots in the head. What tool would best suited to cut the slots? My Dremel tore-up a few months back, so it looks like I'll need to replace it soon.

Thanks, JD...

[CharvelRocker]

The heads on the screws were already in poor shape when I got the guitar. If I don't have any luck finding new screws, I'll take your advice and cut slots in the head. What tool would best suited to cut the slots? My Dremel tore-up a few months back, so it looks like I'll need to replace it soon.

Thanks, JD...

Probably a Dremel. A grinder would work, but is way too big. Alternatively, you may or may not be able to make a slot with some metal-cutting hack saw, and then run a file through it to widen it.

[JDA]

If I don't buy another Dremel tool before I change strings, I'll give the hacksaw and file a try before spending the cash.

Thanks for the help. JD...