Announcement

Collapse
No announcement yet.

Linseed oil for necks? Will this work?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by DonP View Post
    This is the only stuff I use.

    I've had Dan work on a couple of my guitars, but the general concensous on the Les Paul forum is that raw linseed might rot or get moldy. Go very easy if you do use it.
    Yeah, Fretboard Doctor. That's what I use on non-maple boards. Great stuff
    Tone is like Art: Your opinion is valid. Listen, learn, have fun, draw your own conclusions.

    Comment


    • #17
      I've used boiled Linseed on one neck and Tung oil on another, both maple. Both came out smooth as silk. The difference I found was even after 5 years the linseed neck still leaves a slight smell on my hand after playing. Also over time it did get a slight vintage yellow color. The Tung oil has no smell left after a very short time, and had a more vintage orange color right away. Both came out great, but I'd likely use the Tung oil before using the linseed oil again.

      Comment


      • #18
        +1 for tung oil.

        Comment


        • #19
          +1 for Tung oil.
          I used both Boiled Linseed oil and Tung oil before on may types wood in my gunsmith days and Boiled Linseed is very easy to mess up and yes it will get gumy and it smels for ever. Seen any surplus rifle stocks before? Boiled Linseed oil was the prefered us mil finish for years.

          Comment


          • #20
            Originally posted by nhspike View Post
            +1 on boiled linseed oil for years and years on rosewood/ebony
            back of maple necks too
            lemon oil to clean

            Same.

            Comment


            • #21
              Well I just used that Raw Linseed Oil in my original link. I used it on my RR3 and the cheapo Precision copy bass I got recently. Haven't played the RR3 since it's awaiting a Jazz neck pickup, but the bass plays fine. No stickiness or anything like that at all.
              So far....
              http://www.amazon.co.uk/Steven-A.-McKay/e/B00DS0TRH6/

              http://http://stevenamckay.wordpress.com/

              Comment


              • #22
                Few days later and the stuff doesn't smell and it's not sticky in any way. Seems fine.
                http://www.amazon.co.uk/Steven-A.-McKay/e/B00DS0TRH6/

                http://http://stevenamckay.wordpress.com/

                Comment


                • #23
                  I've been using the Fret Doctor on all my guitars fretboards. Works great! Doesn't get tacky or sticky and actually has a pleasant minty smell applying.

                  I've tried tung oil only on a mahogany Ibanez bass body. I am curious to try on an Ibanez RG550 maple neck and fretboard but was a little concerned it would tint it an amber color which is something I wouldn't care for.

                  Comment


                  • #24
                    Fret Doctor

                    Is Fret Doctor ok on the sharkies?

                    Comment


                    • #25
                      Originally posted by axehunter View Post
                      Is Fret Doctor ok on the sharkies?
                      Yes.

                      Comment

                      Working...
                      X