If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
And don't forget, there are no stupid questions, just stupid people.
(j/k)
Hmmm, I have some really old Charvel logo Gotoh tuners that I was going to use on the upcoming project, maybe have to get a standard neck now or spend even more money.
It can be done but you will probably break the gears sooner or later, meaning that it's best to buy a set of correct tuners instead of replacing them at a later date. Also you will have to redrill when you put the correct tuners in so I don't think it's worth the hassle.
Don't drill the little holes for the backside screws, just snug 'em down and they'll be fine
The Fenders I just put on my strat didn't have screws, just a small nipple that goes in the hole. I'd think you could drill new holes for the nipples, and the old holes would be covered by the tuners and not visible. Could be wrong.
_________________________________________________
"Artists should be free to spend their days mastering their craft so that working people can toil away in a more beautiful world."
- Ken M
Comment