putting in a gotoh floyd on my DKMG

[vairules]

i was planning on replacing the JT580LP (which is horrible and i think is also broken from somewhere) with a gotoh floyd rose on my DKMG

Specs: 91.5mm base plate width - 74mm post spacing - 54mm string spacing (2 1/8") - Steel saddles and plate - 42mm (1 5/8") locking top-mount nut - 1 5/8" tall block

could i replace it without any issues ? and more importantly are these things any good. suhr guitars have these things on em so im thinking there good but no personal experience. need some advice guys

[Dred]

The floyd will fit on the posts no problem, and will work just fine. One problem may arise, however. I don't know if the floyd on a DKMG is recessed, but if it is, the locking bolts may stick out of the cavity, as they would with an OFR. I can't confirm this, bot on a Gotoh, they're fairly long.

While the floyd will work just fine and sit on the posts correctly, the locking bolts may not fit in the cavity. I can't confirm this, but watch for that, just incase.