Tweet
Will a dx10d body fit a dk2m neck? Says it will accomadate a 24 fret 25.5 scale neck with 2.25 neck width .Lookin to buy the body if it will fit. Thanks .
-
-
I'm sure it will, but don't take my word for it, someone like Newc will surely chime in with a definitive answer forthwith.
-
It should. There may always be some light sanding or shimming to get it to fit.Comment
-
Exactly, I posted about swapping a DK2 neck onto my KE3 and vice versa. I had to do a fair bit of sanding to get the KE3 neck onto the DK2, but it went eventually.Comment
-
As long as they are from the same general time frame, you should have no trouble.
I put a recent DKMG (piranha) neck on a 2003 WRXT body and the pocket opening was as wide as the neck heel, and since 2 objects cannot occupy the same space at the same time, I had to sand about .05" off the side of the neck heel to get it on.I want to depart this world the same way I arrived; screaming and covered in someone else's blood
The most human thing we can do is comfort the afflicted and afflict the comfortable.
My Blog: http://newcenstein.comComment
-
ok thanks great info. not to be a pain but will this one work too?
I emailed the guy about what is it but got no response. thanks once againComment
Comment