Dome knobs for CTS pots?

[srommes]

Anyone know where you can get dome knobs that will fit the thicker shafted CTS pots like on the USA Select Series Jacksons? I've ordered dome knobs previously for straight shaft pots from various places and they didn't fit due to the hole in the knobs being too small for these larger shafts. Any help would be really appreciated. Thanks!

[SEAN RAF]

What a coincidence, an hour ago I had to bore out the holes on two Charvel domed knobs to fit CTS shafts. I used a 6.5mm drill bit.

[RobRR]

CTS uses 1/4" shafts... ever so slightly bigger than the ones you have. You can drill them out with a 1/4" bit with little effort. Be sure to wrap up the knob really well before clamping it in a bench vise or vise-grips as to not mar it.

[srommes]

CTS uses 1/4" shafts... ever so slightly bigger than the ones you have. You can drill them out with a 1/4" bit with little effort. Be sure to wrap up the knob really well before clamping it in a bench vise or vise-grips as to not mar it.

That will work I guess....Thanks!

[Grandturk]

For what its worth, the gold knobs I got from Allparts fit my ProMod just fine.

[Dogbone]

Stew Mac sells 1/4 Dome knobs. They work well, I used one on my Pro Mod

http://www.stewmac.com/shop/Knobs/Dome_knobs/Dome_Knob.html

[srommes]

Stew Mac sells 1/4 Dome knobs. They work well, I used one on my Pro Mod

http://www.stewmac.com/shop/Knobs/Do...Dome_Knob.html

Sweet. Thanks Dogbone!!