Where's Lou?

[silar]

Silar, I can probably get you a get woodburn logo on that neck. Probably with an EVG laser at 100% power ( 4 Watts ) in about 3 passes....or a CO2 20 watt if you actually want some depth to the logo.-Lou

I've got bubinga veneer on the headstock now.. You can kinda see it here..


it's about 1/24" thickness or so. Maybe less. Reverse headstock. Definitely an option.

[LouSiffer]

The only issue that you will run into doing that type of wood is that it will not stand out much....especially on the darker parts of the grain. Maple is the ideal wood due to its much lighter color. -Lou

[DonP]

I have to go to GE Aviation in Cincy on Monday night and Tuesday.-Lou

Ok, I'll remember to wave goodbye as I head down to south of Nashville

My neighbor Dave G. works at GE.

[stevieb91]

http://gizmodo.com/5823260/make-beau...ar-with-lasers

Every guitarists dream... Sounding like Kenny G....

[silar]

The only issue that you will run into doing that type of wood is that it will not stand out much....especially on the darker parts of the grain. Maple is the ideal wood due to its much lighter color. -Lou

Could you burn it down through to the maple? Just a thought..:think:

[len]

RacerX.....the only man to make Wikipedia bow to a higher power of usless knowledge!! -Lou

[LouSiffer]

Could you burn it down through to the maple? Just a thought..:think:

That wouldn't work out well. It would take forever for one......then it would singe-burn the outline on the bubinga due to the number of passes and heat.....and it would make the maple burn darker, therefor not standing out. Ideally, you could have had the logo cut out of the laminate before you glued it on and then filled it with a table top style resin.

Ideally, you want to have raw, fine sanded maple and do it in about 2-3 passes.-Lou

[LouSiffer]

I just realized I left out the "e" in useless........surprised Ron did not point that out.-Lou

[RacerX]

Because your humor is usually usless, heh heh!

[DonP]

Hey Lou, don't know where you might be at but I spent the day down by the river for the Seafood Festival. It's over, but I'd recommend you visit Newport on the Levee. Had a good time there today. If that's too far, good food can be found in Union Center. Just head North on I75 from GE about 5 miles, first exit past I275. There's a GC and a Sam Ash in that same 5 mile circle from GE. Also in that range is Target World. Pop in, check out some guns, rent a loaner and pop off a few rounds to kill some time. All of this is just to the north of GE.

[LouSiffer]

Today, Lou is in Royal Oak, Michigan just a few blocks from the Woodward Ave cruise!!!-Lou

[tonemonster]

Today, Lou is in Royal Oak, Michigan just a few blocks from the Woodward Ave cruise!!!-Lou

Detroit. I hope you brought your 1911 with you.

[LouSiffer]

In Danville, IL on Lynch Rd.-Lou

[LouSiffer]

Will be in Goshen, IN tomorrow! Then filtering down to Indiannapolis.-Lou

[horns666]

"The Lounacy End of the Mayan Calender, End of the World Tour"
whatever JCF member encounters him first for a bender will set off the apocolypse.

WTfugginF..??? Yes!!!! Tommy...Yes.

Man, I've been deep hiding. Hiding from the world, and things called people..what terrible , aweful things. I just want my Central Air, Darkness, Pain Pills, and a day...just one without bullshit...que, wife and 17..almost 18 year old uber-version of myself. My son >>>VINNY<<<..the fruit of my loin cloth..the human sloth...The silence of the moth...the petite behemoth...ahhhhhh fuggit...VINNY.

Hooka luvin', Spice-bluntin', MILF shuvin', ball-shavin'..kush puffin'...lawn mower humpin'...Guitar strummin'...VINNY "MUMPS" MAGEE. Got the mumps and lost his job..Vinny. Ohhhhh how I love him, and mommy loves him mo.

OK, what did I just type? I don't give a shit! I'm here because ..well, I just saw this shit.

Ron..do you love me? I love you !!! I never told ya man...why? I don't know. I love you. That's what I think.

Lou..were you in Cleveland?..you were practically in my backdoor...I'm mean yard. Yard...door...who cares. You were here.

Love,

Billz