Latest Project(s): Matching Mirror Tops (pic heavy)

[HuntinDoug]

I started doing these in pairs to save time...Still not convinced it does. Both are IC300 Icemans. The silver one is for a guy in Australia. The blue one will most likely go on ebay, or hang in my office for a while...Not sure yet.

[followthereaper]

I say your next project should be an EVH!

[skorb]

are those safe to play?

I mean, no exposed sharp edges?

do you buff all the edges before setting them in?

[HuntinDoug]

I say your next project should be an EVH!

A red, white & black EVH top would be cool. I'd like to do a yellow & black Stryper RR, but the yellow mirror I ordered was defective. They won't let me return it because I cut the sheet down.

are those safe to play?

I mean, no exposed sharp edges?

do you buff all the edges before setting them in?

I file a small 45 degree bevel on all the edges. You can run your hand across it without a problem. In the closeup pic of the silver, you can barely see the bevels.

[MBreinin]

Doug if you do an EVH on an Explorer, Star or Strat body I would not be able to pass that up!!

Mike

[Drake S.]

Hey Doug these look great I found a company that makes the Iceman body with a Floyd Rose route , might make for a good future project.

[HuntinDoug]

Chuk,
I've seen a few companies that will do Iceman bodies. There was a guy on ebay a while back that did nice work. I think he went by "103MPH" or something like that. Check with Tony at Octoberguitars.com , or Denny at Slash bodies. I think they both will do custom shapes & layouts. Tony and I talked about doing a 1 hum, floyded Mirror Top Iceman as a display for his new shop. Denny did a nice 1 hum strat style body for Mark (MM2002) with a zero clearance EMG81 route... I know you are a EMG/Floyd fan. It would be a cool project...